Specification:
Condition: Brand New
Material: Aluminum Alloy
Input pressure: less than 15MPA
Inlet screw: BSP 5/8
Oxygen tube length: 200cm
Measuring range: 0-100mpa
Rated : 10 m3 /H
Medium: oxygen
Package List:
1 * Oxygen Pressure Regulator
1 * Pipe
Features:
1. Made of quality aluminum alloy material, it is , and to use, which has high .
2. Refined processing, the parts are tightly connected, which has compact structure and beautiful appearance, it is safer to use.
3. The pressure gauge is made of glass with thickening design, with clear scale, the reading is accurate and the sensitivity is high.
4. Adopt gas filter, which has double , more energy efficient and gas saving.
5. The gas is moistened by special filtration, so that the oxygen gas impure substances are basically filtered, and non-.
FAQ:
Q: Can this pressure regulator be connected to my oxygen cylinder? (Interface issue)
A: Please confirm the type of valve interface for your oxygen cylinder. We offer multiple standard interfaces, such as American standard CGA 540 (medical oxygen) DISS 1240、 European standard BS3, or thread specifications such as G5/8, W21.8. Please make sure to confirm the interface model when placing an order or in the product specification sheet. Connecting the wrong interface may result in leakage or danger.
Q: What are the installation steps? What are the key precautions?
A:Ensure that the gas cylinder valve and pressure regulator interface are clean and free of grease.
Using a suitable wrench, align the thread with your hand and screw it in to avoid misalignment.
Fully tighten to ensure airtightness, but do not apply excessive force.
Before connecting downstream devices such as ventilators, humidification bottles, and welding guns, the pressure regulator knob should be loosened counterclockwise to the closed position.
Slowly open the main valve of the gas cylinder, check the pressure gauge reading and whether the interface is leaking (leak detection liquid can be used).
Q: What types of gases can it be used for? (Key issue)
A: The pressure regulator must be dedicated! This model is only used for oxygen. It is absolutely prohibited to mix with other gases (such as acetylene, propane, nitrogen), as mixing can cause internal pollution and trigger extremely dangerous chemical reactions (especially with flammable gases).