The core purpose of this type of equipment is to produce acetylene gas on-site and on demand, providing fuel gas for gas welding and gas cutting operations.Below is a detailed explanation of its specific purpose, working scenario, and characteristics:1、 Core application: Provide acetylene gas for metal processingAcetylene (C ₂ H ₂) can produce high-temperature flames […]
Application of Acetylene Generator Asp-10 Read More »
Acetylene welding flashback preventer (also commonly referred to as “flashback preventer” or “flashback prevention device”) is a crucial safety equipment.core functionIts core function is only one: to prevent flame backfire from entering acetylene cylinders or pipeline systems, thereby avoiding severe explosion accidents. 1. What is “tempering”?In gas welding (especially oxygen acetylene welding), tempering refers to
The function of acetylene welding tempering preventer Read More »
First level depressurization: Reduce the high pressure (e.g. 15 MPa) inside the gas cylinder to a stable, lower medium pressure (e.g. 0.5-0.8 MPa). Secondary pressure reduction and stabilization: When you adjust the knob of the flowmeter, the pressure regulator ensures stable output pressure and flow rate, even if the cylinder pressure gradually decreases with use,
1、 What is precision level?Accuracy level is an indicator that measures the maximum allowable error between the measured value and the true value of a pressure gauge. It is usually represented by a number, the smaller the number, the higher the accuracy, the smaller the allowable error range, and the higher the manufacturing cost.2、 The
Classification of grades for stainless steel pressure gauges Read More »
Argon is one of the most widely used shielding gases in welding because it is an inert gas that can effectively protect the molten pool from air pollution.Simply put, the vast majority of common metals and alloys can be welded using argon gas, especially the TIG welding method.Below, we will provide a detailed explanation by
Which metal materials can be welded with argon gas? Read More »
In welding, we usually do not directly set and monitor the pressure of CO ₂, but focus more on and control the flow rate.This is because the pressure during transportation will vary due to the length of the pipeline and the number of joints, while the flow rate directly determines whether the amount of gas
What is the pressure of CO2 during welding? Read More »
Carbon dioxide (CO ₂) can partially or completely replace expensive argon gas (Ar) in welding, mainly in MAG welding (active gas shielded welding).
What gases can Co2 replace in welding? Read More »
Choosing an argon pressure reducer for welding is a very practical issue. argon gas is an inert gas that is always in a gaseous state, making it easier to choose, but there are still key points to note. Single gauge pressure regulator (only with output pressure/flow meter)1. Characteristics: There is only one meter head, usually
How to choose a welding argon regulator? Read More »
The choice of CO ₂ pressure reducer for welding (more accurately referred to as CO ₂ arc+CO ₂ pressure reducer) is very important, as it directly affects the stability of gas output and welding quality. The following are the key points for selection, you can refer to this process to choose: 1、 Firstly, confirm the
How to choose a welding Co2 regulator? Read More »
In oilfields, particularly during the exploration, development, and production of oil and gas fields, a wide variety of pressure gauges are used. Depending on different working conditions, measurement media, and accuracy requirements, various types of pressure gauges are selected. 1、 Classified by working principle and display modeThis is the most basic classification method.1）Pointer type (mechanical)
What types of pressure gauges are used in oilfields Read More »